Inside Out Stenciled Pumpkin Votives


 I used a few empty glass candle votives that I got from Hobby Lobby and turned them into pumpkin candles from the inside.  I used a stencil, glass paint and candle wax.  The stencil will need to be adhesive since the surface is concave and would not lay flush otherwise.  I used my Cricut machine to cut mine but there are self adhesive stencils at Michales and Hobby Lobby.

First I made sure to clean the inside of the glass votive so that the adhesive would stick well (although I did have a few gaps). I placed the stencil then applied the glass paint. I put two layers.   I let the paint dry overnight because I wasnt sure if the hot wax would cause the paint to melt.


I melted one of the large DT prayer candles by placing it in a pot of boing water (sorry no photos).  This one candle did about 5 votives (I did a few Christmas ones as well). 


While I let the wax cool down I placed a wick inside the glass and used a bit of hot glue to keep it in place. I purchased the wicks from Hobby Lobby. I poured the wax in and let it harden .  Next I trimmed the wick and they were ready to burn (or gift)!

I did test mine by burning them down with no issues but I'm assuming that would depend on the type/brand of paint used so if you were to make these i would check whether or not the specific paint you chose was flammable.







I used white vinyl for one stencil and black for another (sorry if the pics are misleading) 






















Comments

Popular posts from this blog

Halloween Recycled Paint Can

Decorative Halloween Wall Mirrors

Hand Painted Coastal Decorative Soaps